Sea Fire Wiring Diagram

Sea-Fire Engine Shutdown and Restart System Installation Guide

Overview

This article provides detailed installation instructions for the Sea-Fire Automatic Engine Shutdown and Restart System. These instructions cover most standard installations.

Materials Required

* Sea-Fire FM200 Fire Suppression System * 51mm circular hole saw * M4 mounting stud * 16 stranded copper wire (conforming to ABYC Standards)

Installation Instructions

Step 1: Mounting the Display

* Drill a 51mm circular hole for the display. * Screw the central mounting M4 stud into the brass insert.

Step 2: Electrical Connections

* Connect the wiring to the system using 16 stranded copper wire. * Ensure the connections meet ABYC Standards.

Step 3: Final Setup

* Test the system to ensure proper operation. * Follow the manufacturer's instructions for any additional configurations or settings.

Troubleshooting

* If the system fails to activate, check the electrical connections and sensors. * Ensure the fire suppression system is properly installed and charged. * Refer to the manufacturer's manual for further troubleshooting assistance.

Additional Resources

* Sea-Fire FM200 Installation Instructions Manual * ABYC Standards for Marine Electrical Systems

Conclusion

By following these instructions, you can correctly install the Sea-Fire Automatic Engine Shutdown and Restart System. This system provides an essential safety measure to protect your vessel and personnel from fire emergencies. Regular maintenance and testing are recommended to ensure optimal performance.